Start with the installation video. Watch it once and everything makes sense. wallCLIXX™ is a press mount system - not a hanging system - and seeing the motion once is worth more than any written instruction. Your brain understands it visually before your hands do.

The easiest technique for first time engagement:

Hold your artwork close to the wall. Place one index finger behind the frame inside the rail on one side. As you move the frame toward the wall you will feel the wall button make contact with the back of your fingernail. That tells you the button and rail are aligned. Remove your finger and press that side firmly until you feel and hear the click. Repeat on the other side. Always work one side at a time.

What to expect:

If it does not engage first time - completely normal. Remember our instinct is to hang not press. Guide the button into the rail first then press firmly.

If you heard the click and it feels very secure - that is correct. That is exactly how it should feel. The click means it is on. You do not need to recheck it.

Once you have done it once it is instinctive. Every installation after the first is faster and more confident. Still unsure? Watch the installation video again - it answers everything.

For the first time, your hanging system tells you when your artwork is correctly installed - before you let go. wallCLIXX™ is a precision mounting system that confirms correct engagement through a haptic and audible click. No guesswork. No callbacks. No doubt. Every other system asks you to trust it is on. wallCLIXX™ proves it.

It means your artwork is locked, level, and correctly engaged — confirmed before you walk away. The click happens when the wall button and frame clips fully engage, delivering simultaneous haptic and audible feedback. Think of it like a seatbelt — you hear it, you feel it, you know. No other picture hanging system in the world does this.

Hold your artwork at the height and position that feels right - wallCLIXX™ does the rest. With a firm pressure on the top corners of the frame the fold-over locator in each corner marks the exact wall position in one action, eliminating the measurement step entirely. No tape measure. No pencil calculations. No second attempts. No extra holes.

It’s our signature patented foldover alignment tab, a clever detail that helps you know the mark for the attachment is in the right spot. Click it into place to use it on the wall then fold it back when you are done.




Your existing frames almost certainly work with wallCLIXX™ - no new frames required. If your frame has a minimum 8mm (5/16 inch) rebate depth and a minimum 12mm (1/2 inch) frame width the corner rails will engage correctly and wallCLIXX™ will hang it with the same precision and confidence as any new frame.

The corner rails attach to the back of your existing frame with standard screws - no modification, no specialist tools, no permanent alteration to the frame itself. If you are unsure whether your existing frames meet the minimum requirements check with your framer before installation. Refer to the wallCLIXX™ Technical Data Sheet for full specifications.

wallCLIXX™ handles the full range of display sizes - from small A4 prints (8.3 x 11.7 inches / 210 x 297mm) through to large statement canvases and mirrors exceeding 2m (78 inches) in any dimension. If your local art store, gallery, or framer carries it in a standard frame - wallCLIXX™ will hang it.

Two measurements determine compatibility - a minimum 8mm (5/16 inch) rebate depth and a minimum 12mm (1/2 inch) frame width for the corner rails to engage correctly. Frame width and height have no upper limit within the 35kg (77lb) working load per set. For unusually large or heavy works exceeding 35kg (77lb) contact the wallCLIXX™ team directly.

Refer to the wallCLIXX™ Technical Data Sheet for full compatibility specifications.




wallCLIXX™ opens up display possibilities well beyond standard framed artwork. Framed mirrors, mixed-media pieces, and decorative objects are all compatible - provided the item has a minimum 8mm (5/16 inch) rebate depth, is within the 35kg (77lbs) working load, and the wall surface is drillable.

If you are unsure whether your frame is drillable, check with your framer before installation. If it has a rebate and it's drillable, wallCLIXX™ will hang it with the same haptic-verified precision as any framed artwork.

Refer to the wallCLIXX™ Technical Data Sheet for full specifications.




wallCLIXX™ gives you the freedom to hang virtually any framed object with confidence - canvas stretcher frames, traditional timber frames, float frames, and most metal frames are all compatible. The only requirements are a minimum 8mm (5/16 inch) rebate depth for the corner clips to engage correctly and a drillable frame material. Metal frame compatibility depends on the specific profile - contact the wallCLIXX™ team directly to confirm before installation.

If it has a rebate and it's drillable, wallCLIXX™ will hang it. Refer to the wallCLIXX™ Technical Data Sheet for full specifications.

wallCLIXX™ can hang any framed object with a minimum 8mm (5/16 inch) rebate depth - framed artwork, mirrors, canvases, prints, photographs, certificates, and decorative objects. If it has a frame with a rebate and the wall surface is drillable, wallCLIXX™ will hang it. From small A4 prints (8.3 x 11.7 inches) through to large canvases and mirrors exceeding 2m (78 inches).

Maximum working load is 35kg (77lbs) per set. For oversized or unusually heavy works exceeding 35kg, contact the wallCLIXX™ team directly to discuss the appropriate configuration.

For full technical specifications refer to the wallCLIXX™ Technical Data Sheet.