Legal notice

Important information

wallCLIXX™ is a mounting interface for artworks, frames and mirrors. It is not a fixing. Screws and anchors are not supplied, and selecting fixings appropriate to the wall substrate and the load is the responsibility of the installer.

Working load: 35 kg per set. Independently tested by SGS New Zealand, report INZ86698-01A, on timber framing. Performance on other substrates depends on the anchors used.

wallCLIXX™ requires a frame with a minimum width of 12 mm and a minimum rebate depth of 8 mm. It is not suitable for flat-backed artworks or flat back unframed mirrors.

Intended use. wallCLIXX™ is for artworks, frames and mirrors only. It is not intended for televisions, shelving, cabinetry, structural or load-bearing applications, or any installation where failure could cause injury.

Install in accordance with the supplied instructions. The audible and tactile click confirms bracket engagement - do not release the artwork before it is both heard and felt.

The security washer (WSR15) is included with every set. Fitting is at the installer's discretion.

wallCLIXX Limited is not liable for damage or loss resulting from unsuitable substrates, anchors, fixings, installation methods, or use outside the intended application.

Nothing in this notice affects your rights under the New Zealand Consumer Guarantees Act, or equivalent consumer legislation in your country.

wallCLIXX™ is a trademark of wallCLIXX Limited. Patent pending. Design applications filed.